Archive / Electronics Projects

RSS feed for this section

Electronics Projects, Micro Controller Projects, 8051 Projects.

Metal Detector

Metal Detector

Abstract:

Metal detector project is a portable electronic device which detects the presence of metal nearby. Metal detectors are useful for finding metal inclusions hidden within objects, or metal objects buried underground. They often consist of a handheld unit with a sensor probe which can be swept over the ground or other objects. If the sensor comes near a piece of metal this is indicated by a changing tone in earphones, or a needle moving on an indicator. Usually the device gives some indication of distance; Continue reading “Metal Detector” »

Order Metal Detector

Class Room Automation and Auto Energy Saver

Class Room Automation and Auto Energy Saver

Class Room Automation and Auto Energy Saver

Abstract:

Class Room Automation and Auto Energy Saver project is proposing model which shows total person in the room and save the energy usages. This project is controlled by AT89S52 micro – controller (8051 series family) which monitors the gate for entry and exit of person with help of sensors, so that it can count the person present in the room. This system always monitors the gate for counting the number of person and updates at each person enters into the room or exits from the room and displays it at the 16×2 character LCD display. Along with monitoring the number of person our project also Continue reading “Class Room Automation and Auto Energy Saver” »

Order Class Room Automation and Auto Energy Saver

PWM Lamp Flasher with MOSFET using 8051

PWM Lamp Flasher with MOSFET using 8051¬

PWM Lamp Flasher with MOSFET using 8051

Abstract:

PWM Lamp Flasher with MOSFET using 8051 is used to ON/OFF the Lamp with flashing. A low voltage lamp of 12V is driven by a power MOSFET in PWM mode which is derived from a microcontroller. There is microcontroller 8051 which generates the PWM signal and forwards it to the transistor which further transfers to MOSFET. Now MOSFET controls the lamp flashing according to PWM signal. There are two Push to ON button, one for ON the Lamp and other for OFF. When we press the ON button then it passes the signal to the controller. Now controller generates the PWM signal and sends to the NPN transistor. Continue reading “PWM Lamp Flasher with MOSFET using 8051” »

Order PWM Lamp Flasher with MOSFET using 8051

Android based Vehicle Tracking System using GPS-GSM

Android based Vehicle Tracking System using GPS-GSM

Android based Vehicle Tracking System using GPS-GSM

Abstract:

Android based Vehicle Tracking System using GPS-GSM provides a wireless system which gets the vehicle location at current time and send location information to administrator mobile using GPS and GSM. There is an android application; user has to use this application for getting the location information. When he/she clicks on Get Info button through android phone, this application automatically sends the message to our system’ GSM Modem. Our system has micro controller ATMEGA328 which continuously checks for new message. When it gets the message with predefine format so that it filter the right message, then controller first read the mobile number from which it gets the message for location. Continue reading “Android based Vehicle Tracking System using GPS-GSM” »

Order Android based Vehicle Tracking System using GPS-GSM

Density Based Advance Traffic Light System with 8 sensor using 8051

Advanced Traffic Light System

Density Based Advance Traffic Light System with 8 sensor using 8051

Abstract:

The main objective of our project Density Based Advance Traffic Light System with 8 sensor using 8051 is to provide more advance facility at red light crossing. Normally there is traffic system in which each side gets green light for fixed time then red light gets on whether there is any traffic presence or not on that side. And traffic on other sides has to be waiting which waste of time. So, we provide an idea to overcome this problem. In our system there are total eight sensors, two at each side which detects the traffic on each side. The first sensor on each side tells to the system that there is any traffic or not. If system knows that there is no any traffic the side where the green light is going to be on, then it switches to the next side without wasting of time. Continue reading “Density Based Advance Traffic Light System with 8 sensor using 8051” »

Order Density Based Advance Traffic Light System with 8 sensor using 8051

Provided by orange county fountain repair