Warning: Creating default object from empty value in /home/iqbalep/engineerprojects.info/wp-content/themes/mystile/functions/admin-hooks.php on line 160
Engineer Projects
Engineeringprojects.info Electronics Electrical Mechanical Projects Slider Intro
RFID Door Access System
Cellphone Operated Robot

Greenhouse Environment Control System

Abstract :

Greenhouses Environment Control System form an important part of the agriculture and horticulture sectors in our country as they can be used to grow plants under controlled climatic conditions for optimum produce. Appropriate environmental conditions are necessary for optimum plant growth, improved crop yields, and efficient use of water and other resources. Automation is process control of industrial machinery and processes, thereby replacing human operators. The soil moisture conditions, environment temperature and various climatic parameters govern plant growth. Automating the data acquisition process allows this information (soil moisture, temperature and various climate parameters) to be collected at high frequency with less labor requirements.

Continue reading “Greenhouse Environment Control System” »

Order Monitor and Control of Greenhouse Environment

Cell Phone Controlled Land Rover using AT89S52

 

Cell Phone Operated Land Roverv

Abstract:

Cell Phone controlled Land Rover using AT89S52 is basically made to operate robots by cell phone in order to simplify the control of robots. It is mainly focused to overcome the limited working range of wireless controlled robots which uses RF circuit. Cell phone controlled robot provides the advantages of robust control and increases the working range as large as the coverage area of the service provider. There is no any interference with other controllers and give up to twelve controls. It enables you to control the your robot only by pressing of your mobile key from anywhere just like that your cell phone works as remote control. Although, the Cell phone controlled robot’s appearance and capabilities vary vastly. In spite of the fact all robots share the feature of a mechanical, movables structure under some form of control.

Continue reading “Cell Phone Controlled Land Rover using AT89S52” »

Order Cell Phone Operated Land Rover using AT89S52 (8051 Family)

Metal Detector

Metal Detector

Metal Detector

Abstract:

Metal detector project is a portable electronic device which detects the presence of metal nearby. Metal detectors are useful for finding metal inclusions hidden within objects, or metal objects buried underground. They often consist of a handheld unit with a sensor probe which can be swept over the ground or other objects. If the sensor comes near a piece of metal this is indicated by a changing tone in earphones, or a needle moving on an indicator. Usually the device gives some indication of distance; the closer the metal is, the higher the tone in the earphone or the higher the needle goes. Our metal detector has a range of approximately 10cm. Continue reading “Metal Detector” »

Order Metal Detector

Class Room Automation and Auto Energy Saver

Class Room Automation and Auto Energy Saver

Class Room Automation and Auto Energy Saver

Abstract:

Class Room Automation and Auto Energy Saver project is proposing model which shows total person in the room and save the energy usages. This project is controlled by AT89S52 micro – controller (8051 series family) which monitors the gate for entry and exit of person with help of sensors, so that it can count the person present in the room. This system always monitors the gate for counting the number of person and updates at each person enters into the room or exits from the room and displays it at the 16×2 character LCD display. Along with monitoring the number of person our project also Continue reading “Class Room Automation and Auto Energy Saver” »

Order Class Room Automation and Auto Energy Saver

PWM Lamp Flasher with MOSFET using 8051

PWM Lamp Flasher with MOSFET using 8051¬

PWM Lamp Flasher with MOSFET using 8051

Abstract:

PWM Lamp Flasher with MOSFET using 8051 is used to ON/OFF the Lamp with flashing. A low voltage lamp of 12V is driven by a power MOSFET in PWM mode which is derived from a microcontroller. There is microcontroller 8051 which generates the PWM signal and forwards it to the transistor which further transfers to MOSFET. Now MOSFET controls the lamp flashing according to PWM signal. There are two Push to ON button, one for ON the Lamp and other for OFF. When we press the ON button then it passes the signal to the controller. Now controller generates the PWM signal and sends to the NPN transistor. Continue reading “PWM Lamp Flasher with MOSFET using 8051” »

Order PWM Lamp Flasher with MOSFET using 8051

Android based Vehicle Tracking System using GPS-GSM

Android based Vehicle Tracking System using GPS-GSM

Android based Vehicle Tracking System using GPS-GSM

Abstract:

Android based Vehicle Tracking System using GPS-GSM provides a wireless system which gets the vehicle location at current time and send location information to administrator mobile using GPS and GSM. There is an android application; user has to use this application for getting the location information. When he/she clicks on Get Info button through android phone, this application automatically sends the message to our system’ GSM Modem. Our system has micro controller ATMEGA328 which continuously checks for new message. When it gets the message with predefine format so that it filter the right message, then controller first read the mobile number from which it gets the message for location. Continue reading “Android based Vehicle Tracking System using GPS-GSM” »

Order Android based Vehicle Tracking System using GPS-GSM

Density Based Advance Traffic Light System with 8 sensor using 8051

Advanced Traffic Light System

Density Based Advance Traffic Light System with 8 sensor using 8051

Abstract:

The main objective of our project Density Based Advance Traffic Light System with 8 sensor using 8051 is to provide more advance facility at red light crossing. Normally there is traffic system in which each side gets green light for fixed time then red light gets on whether there is any traffic presence or not on that side. And traffic on other sides has to be waiting which waste of time. So, we provide an idea to overcome this problem. In our system there are total eight sensors, two at each side which detects the traffic on each side. The first sensor on each side tells to the system that there is any traffic or not. If system knows that there is no any traffic the side where the green light is going to be on, then it switches to the next side without wasting of time. Continue reading “Density Based Advance Traffic Light System with 8 sensor using 8051” »

Order Density Based Advance Traffic Light System with 8 sensor using 8051

State Electricity Board Line Cutting Control System using PC

Electric Line Cutting System

State Electricity Board Line Cutting Control System using PC

 

Abstract:

State Electricity Board (SEB) Line Cutting Control System using PC is provides facility to control the State Electricity Board electric line cutting control by software on PC. By using this project, admin can control his/her Industrial, Domestic and Commercial electric line cutting by managing date or time entered in the software installed in PC. In our project when particular date and time meets then our software sends signal to micro controller for further process via MAX232 IC. Now micro – controller 8051 send the proper commands to the ULN 2003 IC which controls the relays. These relays control cutting the line connected to it, thus electric to that particular line (Industrial, Domestic and Commercial) with help of these relay. The admin has option to enter the separate date and time for each of three Industrial, Domestic and Commercial line Continue reading “State Electricity Board Line Cutting Control System using PC” »

Order State Electricity Board Line Cutting Control System using PC

Electrical Appliances Automation using Android Phone via Bluetooth

Appliances Automation using Android Phone via Bluetooth

Appliances Automation using Android Phone via Bluetooth

Abstract:

Electrical Appliances Automation using Android Application via Bluetooth project is to control the electric appliances wirelessly by using android mobile’s Bluetooth. There is an android application which has to be installed on user’s mobile. Now using this application user can control all the electric appliances of their home according to their choice. There is a micro controller based circuit attached with the electric board which has the connection of all the appliances to be controlled. A Bluetooth module is connected to this circuit which receives the signal from mobile’s bluetooth and forwarded it to the controller for further process. Controller checks the command receives and matches this commands from its memory. After then it gives output to the ULN2803 which control the relay to be ON or OFF according to command. The relay works as automatic switch for the appliance connected with it. Thus, this system gives user to free from extra remote or manually control the home’s appliances. This system can be applied in industry or in offices. Continue reading “Electrical Appliances Automation using Android Phone via Bluetooth” »

Order Electrical Appliances Automation using Android Phone via Bluetooth

GSM based Locker Security System with EEPROM

GSM based Locker Security System

GSM based Locker Security System

Abstract:

GSM based Locker Security System with EEPROM to protect the locker against theft or misuse by other person. This project is controlled by micro controller 8051 with GSM modem. There is a 3×4 matrix keypad to enter the password for operate the locker. If any other person or theft will try to enter the password and if he tries three times with wrong password then our system automatically sends the theft alert message to administrator using GSM modem. There is 16×2 character LCD display which displays all the information like password matched or not, sending theft alert message etc. Continue reading “GSM based Locker Security System with EEPROM” »

Order GSM based Locker Security System with EEPROM

AC Motor Speed Control using IR TV Remote with ZVS, 8051

AC Motor Speed Control using IR TV Remote with ZVS

AC Motor Speed Control using IR TV Remote with ZVS

Abstract:

The main objective of AC Motor Speed Control using IR TV Remote to provides controlling the speed of AC motor or any electrical appliances by a TV remote with ZVS method. TSOP receives the signal from TV remote and provides it to micro – controller for further process. TSOP 1738 is a high sensitive IR receiver which can sense 38 KHz IR light. This project has coverage distance up to 10 meter, so it can be used at home offices, Showrooms and etc. This project can easily installed and used. Basically, AC motors need more current, so we use Triac driver for our driving AC motor. Here we need to consider two factors, firstly driving AC motor with low current and protecting micro controller from high current which is done by using MOC3021. A 16×2 character LCD is also used here to displaying the speed of motor. Continue reading “AC Motor Speed Control using IR TV Remote with ZVS, 8051” »

Bus Route Optimization

BusO_Home

Abstract:

Bus Route Optimization project is to providing customer facilities to get information about Buses and route with source, destination and date of journey easily. Whenever an organization, in the business of providing mobility, is entrusted with moving goods and peoples a natural question that arises is how efficiently that organization can provide the services. This basic requirement of efficient mobility of goods and passengers gives rise to, among many other things, the subject areas of optimal routing and scheduling. In the following sections the problems of optimal routing and optimal scheduling are done by our Bus Route Optimization project.

Continue reading “Bus Route Optimization” »

Electricity generation through stairs

mechanical project

Electricity generation through stairs

 

Introduction:-

In our modern world the most critical problem standing over human society is to find out the alteration of non-renewable energy sources. And we find hope in the renewable energy sources. Walking is most common activity in day to day life. When a person walks he loses energy to the road surface in the form of impact, vibration, sound etc, due to transfer of his or her weight on the road surface, through foot falls on the ground during each step. This energy can be tapped and converted into usable form such as electric form. In order to develop a technique to harness foot step energy, a foot step electricity generating device was developed. This device, if embedded in footpaths, can convert foot impact energy into electrical form. If such devices are embedded into places where there is continuous human traffic like malls, railway platforms, city footpaths etc, the electricity generated from these devices can be used for street lighting purpose.

Wireless mobile charging

Wireless charger

Wireless mobile charger


Abstract:

The main objective of Wireless Charger System is to charge the mobile battery by using wireless charger. The dream of wireless charging is just to be able to plop your phone on a shelf after work and have it fully charged when you pick it up again on your way out. This technology will replace cables and standardize on one interface, potentially being able to adjust power settings to charge different types of batteries.

Continue reading “Wireless mobile charging” »

Order Wireless mobile charging

Provided by orange county fountain repair